1. Retain the existing terrace where its condition allows
Pedestal installation can avoid the complete removal of an old terrace if the retained substrate is suitable for the new structure. This depends in particular on its stability, load-bearing capacity, the condition of the existing surface and the composition of the underlying structure.
Where these conditions are met, retaining the existing terrace can help limit:
- demolition work and the removal of rubble;
- work on the substrate;
- some of the disruption and downtime associated with the project.
However, this is not a solution for every project. An unstable substrate, waterproofing defects or insufficient height at thresholds may require preparatory work. Assessing the existing structure remains the first step of the project.
2. Address level differences without concealing substrate defects
Older terraces may have level differences or a slope that does not match the desired finished level. Adjustable pedestals make it possible to set the height of each support point to create a new surface in line with the project requirements.
Where the substrate is sloped, the U-PH5 slope corrector can be used with pedestals in compatible configurations. Placed beneath the pedestal, it can correct a slope of up to 5%, depending on the specifications of the selected system.
This adjustment capability does not mean that a deteriorated substrate can be retained without remedial work. Cracks, settlement or areas with insufficient load-bearing capacity must be assessed and, where necessary, addressed before installation. It is also important to distinguish between the level of the surface finish and the slope of the substrate: water must still be able to drain beneath the new terrace.