Technical Roof Decks: Facilitating Access to Utility Lines with Buzon Pedestals

On a flat roof housing technical equipment, the flooring must meet two requirements: it must allow for traffic appropriate to the intended use and maintain access to the installations for maintenance. The choice of installation system must also take into account the available height, loads, water drainage, and the waterproofing system.

For architects, engineering firms, specifiers, and installation contractors, Buzon pedestals are a solution worth considering from the design phase onward. They create space beneath the surface and, depending on the configuration, allow for the inclusion of removable components to facilitate future maintenance work.

Addressing the constraints of technical roof terraces

On a roof terrace, the space beneath the slabs can accommodate certain cables, pipes or conduits, provided their layout is coordinated with the other equipment. This arrangement conceals them while preserving access to the relevant areas when the slabs can be removed.

This is particularly useful on commercial, industrial or hospital buildings, where ventilation, air-conditioning equipment or electrical services may require regular inspection and maintenance. The layout plan must therefore take account not only of circulation routes but also of access points that need to remain available over time.

Pedestal installation does not remove the need to protect the waterproofing or verify the loads supported by the roof. Bearing points, any protective layers and service routes must be defined with the specialists responsible for the structure and waterproofing. A pedestal terrace also does not replace the provisions required for water drainage.

PB-00: a fixed pedestal for low build-up heights

Where the available build-up height is limited, the PB-00 offers a low-height installation option. According to the specifications given for this model, this fixed pedestal measures 15 mm high and is suitable for configurations that do not require height adjustment.

For professionals, choosing a fixed pedestal requires the substrate and the desired finished level to be checked beforehand. Unlike an adjustable pedestal, the PB-00 cannot compensate on its own for substantial height variations. Its use must therefore be assessed in light of substrate flatness, slab thickness and constraints at thresholds and equipment.

Its use on a roof terrace must also be validated against the loads, the selected surface finish and the requirements applicable to the waterproofing system.

U-PAD: an interface to consider for substrate protection

When a pedestal rests on a waterproofed roof, the interface with the substrate requires particular attention. The U-PAD, described as a rot-resistant recycled rubber pad, can be placed beneath the pedestal in compatible configurations to provide an intermediate layer between the bearing point and the substrate.

Depending on the project, this interface can be considered to:

  • Protect the substrate at bearing points, subject to checking compatibility with the membrane and the waterproofing contractor’s specifications;
  • Accommodate minor irregularities, without replacing proper substrate preparation;
  • Contribute to acoustic treatment, if the desired performance is confirmed for the complete terrace build-up;
  • Adjust height locally, depending on the available thicknesses and assembly options approved by Buzon.

Protection against puncture, acoustic performance and height-adjustment options should not be assumed solely because a U-PAD is present: they depend on the selected product, the loads and the roof build-up.

A solution to coordinate with the entire project

On a technical roof terrace, combining low-height pedestals with a protective interface can help create a surface that remains accessible and can be locally dismantled. For this solution to serve its purpose, several points must be settled before installation: the roof’s load-bearing capacity, compatibility with the waterproofing, bearing-point layout, water drainage, access to services and maintenance arrangements.

Buzon solutions, including the PB-00 and U-PAD where their combination is appropriate, must therefore form part of an overall design. Coordination between the technical trades, waterproofing specialists and surface installers is what makes it possible to create a functional roof terrace that remains maintainable over time.